Super Duplex 2205 TEC for Corrosion Protection

There are three typres of metallurgies used in the Permian and Delware Basins. GEO PSI is the only downhole monitoring company that manufactures all three types of metallurgies.

About 2205 TEC

GEO PSI has successfully been manufacturing 2205 TEC since August 2023. It was developed to be a better cost-effective solution than Incoloy 825 to solving corrosion problems in the Delaware and improve reusability (pull and re-runs). To date we have manufactured and sold over 4,300,000′ of 2205 TEC with zero defects, flaws, non-conformance reports, or operational issues. Since 99% of the capillary in the Permian and Delaware Basin in 2205, why not TEC?

End users often ask GEO PSI if non-post production annealing makes a difference in chemical resistance. 

When comparing 2205 stainless steel in an annealed state to a work-hardened state, the annealed version will be significantly softer, more ductile, and easier to form, while the work-hardened version will be much stronger and harder, but less pliable, due to the increased internal stresses from the cold working process; both are considered “duplex” stainless steels with excellent corrosion resistance, but the work hardening process enhances its strength at the cost of formability. It is important to note that GEO PSI American sourced 2205 is pre bright annealed before our TEC manufacturing process.

 

GEO PSI Tube Mill Manufacturing

Key Differences:

Strength:

Annealed 2205 has a lower tensile strength compared to work-hardened 2205, making the work-hardened version better suited for high-stress applications.

Ductility:

Annealed 2205 is more ductile and easier to bend or form due to its lower hardness, while work-hardened 2205 is more brittle and harder to shape.

Machinability:

Annealed 2205 is generally easier to machine than work-hardened 2205 due to its lower hardness.

Heat Treatment:

2205 stainless steel cannot be significantly hardened through heat treatment and is typically only annealed to soften it for forming operations.

Work Hardening Potential:

While not heat treatable to increase hardness, 2205 readily work hardens through cold forming processes like bending or rolling, increasing its strength with each deformation.

Applications:

Due to its high strength and corrosion resistance, 2205 is often used in demanding environments like chemical processing, marine applications, and oil and gas industry components.

GEO PSI Rollers

SS316L, Duplex 2205, and Incoloy 825 are all high-performance alloys known for their corrosion resistance and other desirable properties, but each possesses unique characteristics that make them suitable for different applications.

316L Stainless Steel:

316L Stainless Steel is mainly made of iron, with important amounts of chromium (16-18%), nickel (10-14%), and molybdenum (2-3%). The molybdenum helps it resist pitting and corrosion, especially in salty environments. The low carbon content also helps prevent problems during welding, which makes it more resistant to rust.

Pros:

Cons:

  • Good resistance to general corrosion and pitting in moderate chloride environments
  • Widely available and cost effective
  • Susceptible to pitting and crevice corrosion in high chloride concentrations
  • Can suffer from stress corrosion cracking (SCC) in the presence of H2S and chlorides, especially at higher temperatures
  • Not ideal for high CO2 partial pressures

Super Duplex 2205:

As its name suggests, it has a duplex microstructure consisting of both austenitic and ferritic phases. This unique structure gives it a remarkable combination of high strength, excellent toughness, and superior corrosion resistance. Its high chromium, molybdenum, and nitrogen content further enhance its resistance to aggressive environments, making it ideal for use in marine applications, chemical processing, and the oil and gas industry.

Pros:

Cons:

  • Excellent resistance to pitting, crevice corrosion, and SCC in chloride environments, even with some H2S present
  • Higher strength than 316L
  • Good resistance to CO2 corrosion at moderate pressures
  • Can be susceptible to SCC in high H2S concentrations, especially at elevated temperatures and pressures
  • Not as readily available as 316L
  • More expensive than SS316L, but considerably less expensive than Incoloy 825
  • Doesn’t perform as well as inconel in a H2S environment, but performs considerably better than 316L

Incoloy 825:

This nickel-based superalloy is renowned for its exceptional corrosion resistance in a wide range of aggressive media, including acids, alkalis, and oxidizing agents. Its high nickel and chromium content, along with additions of molybdenum, copper, and titanium, provide excellent resistance to general corrosion, pitting, crevice corrosion, and stress corrosion cracking. Incoloy 825 also exhibits good high-temperature strength and oxidation resistance, making it suitable for use in chemical processing, pollution control equipment, and nuclear applications. Each of these alloys offers a unique set of properties that make them well-suited for specific applications where corrosion resistance, strength, and other factors are critical considerations.

Pros:

Cons:

  • Exceptional corrosion resistance in a wide range of aggressive environments, including high concentrations of CO2, H2S, and chlorides
  • Excellent resistance to SCC
  • Good high-temperature strength and oxidation resistance
  • More expensive than super duplex and 316L
    stainless steel
  • May not be necessary for less severe conditions
GEO PSI Roller

Conclusion

GEO PSI’s track record has proven that 2205 is a good solution for the Delaware and Permian Basin, where SS316L is not as effective as desired. Work hardening increases strength but may slightly reduce corrosion resistance. Although, this reduction is often not significant in practical applications. Annealed 2205 stainless steel exhibits the best corrosion resistance due to its optimized microstructure.

Want to be the first to know? Subscribe to our Newsletter!

Enter your email below and we will send you our latest content directly to your inbox. Be the first to read about topical discussions, and new product releases.

Leave a Reply

More-Articles-Icon-Two-Documents-Blog-News-GEO-PSI
News & Events
Novio Kareem

In Focus: GEOPulse AI & Fiber Innovation

In the field, data is only as valuable as it is actionable. We recently sat down with Todd Chuckry, our Global Fiber Optics and New Business Director, to pull back the curtain on our new fiber optics solution, GEOPulse AI. This conversation explores the future of fiber optics, the importance of vertical integration, and how

Read More »
Solutions-Reservoir-Surveillance-Applications-Free-Analysis-GEO-PSI
Archive
Jeff Scott

Downhole Gauges: Analog vs. Digital Compared

Downhole Piezo-Resistive Pressure Tools At GEO PSI we manufacture downhole instrumentation sensors which are sold in many different markets across the world. We sell both analog 4-20 mA downhole pressure tools and several types of digital tools. Both analog tools and digital tools utilize the same type of piezo-resistive transducer, which is often called a sapphire,

Read More »
SPE-Blog-Post-Background-GEO-PSI
Artificial Lift
Jeff Scott

GEO PSI at SPE Santa Maria 2019

“ROI from Real Time Downhole Instrumentation EOR: Steam Injection and Waterflood Applications You Can’t Manage What You Don’t Measure” – By John Sullivan and Jeff Scott, GEO PSI GEO PSI has been invited to present at the SPE Santa Maria September Meeting And Networking Event! (View Full Invite Below) Our presentation will focus on the

Read More »