2018 | GEO Pressure Systems Inc.

Permanent Downhole Gauges: Analog vs. Digital

Downhole Piezo-Resistive Pressure Tools

At GEO PSI we manufacture downhole instrumentation sensors which are sold in many different markets across the world. We sell both analog 4-20 mA downhole pressure tools and several types of digital tools. Both analog tools and digital tools utilize the same type of piezo-resistive transducer, which is often called a sapphire, or crystal type of sensor.

The only difference is the form of telemetry communication, which sends bottomhole data up to the surface. Our analog tool sends a 4-20 mA current signal to the surface, while the digital tool transmits back a digital modulation that is decoded by a surface receiver.
I am often asked by clients, what are the pros and cons of each type of tool. The answers are surprising to many.

Outputs

Analog 4-20mA Gauge

Digital Downhole Tool

Analog tools typically only measure one thing, often pressure. In this case, we have an analog tool which is able to measure both pressure and temperature. Even still, the analog gauges are limited in the amount of data they are able to transmit.

Digital tools are capable of transmitting allot more information. Our standard digital tools measure pressure, temperature, vibration, and diagnostic information. Multiple digital tools can be connected to one single conductor downhole cable.
ADVANTAGE DIGITAL

Price

Analog 4-20mA Gauge

Digital Downhole Tool

Analog tools are less expensive to produce, and are typically more cost effective.
ADVANTAGE ANALOG

Digital pressure tools are more expensive to manufacture, and command a higher price in the market. While they used to be sold in lower volumes, their many advantages in accuracy have made them more popular in the market, and economies of scale is starting to bring the price down.

Surface Electronics Requirements

Analog 4-20mA Gauge

Digital Downhole Tool

The 4-20 mA standard is universal. Our analog tools are ready to connect to almost any VFD, PLC, SCADA Input or DCS System directly.
ADVANTAGE ANALOG

Digital tools typically require a surface interface to decode the telemetry, which adds to the complexity and cost of the complete system.

Accuracy

Analog 4-20mA Gauge

Digital Downhole Tool

Analog tools can be calibrated to be as accurate as digital tools. Often they are not, in order to keep costs down.
TIE – The customer must decide what accuracy is needed for the test.

Digital tools are usually very accurate. Pressure accuracy is typically +/- 0.05% full scale.
TIE – The customer must decide what accuracy is needed for the test.

Resolution

Analog 4-20mA Gauge

Digital Downhole Tool

The resolution of the analog tool is solely determined by the input of the surface device it is being connected to.  This is known as A to D (analog to digital conversion). The quality of an A-D is measured in bits. High quality inputs are 14-18 bit, whereas lower quality ones are 10-12 bits.

The beauty of digital is that once a digital tool has calculated a value it remains in digital quality, which is usually 24 bit resolution. The optimum pressure resolution of an analog gauge calibrated to 1,000 psi being read by a 10 bit A-D input is about +/- 0.97 psi, whereas a 16 bit A-D input is about 0.02 psi whereas 24 bit would be 0.00006 psi, which far exceeds the physical limitations of the diaphragm that protects the transducer.
ADVANTAGE DIGITAL

Troubleshooting & Reliability

Analog 4-20mA Gauge

Digital Downhole Tool

If an analog tool fails for any reason, it can generate false readings. For example if fluid invades the downhole cable, the resistance will lower, causing an increase to the current output. 
TIE – Both our analog and digital tools are built to provide industry leading reliability and durability

Digital tools either work or they don’t. Binary data is either received or it isn’t. 
The offset is that there is more that go wrong with a downhole digital tool. 
TIE – Both our analog and digital tools are built to provide industry leading reliability and durability

Conclusion

There is no right or wrong. The important factors are to understand the test objectives and balance the requirements against your budget. I recommend considering both technologies for your next downhole instrumentation project. To learn more about which tools may be right for your next project, feel free to contact one of our regional sales staff and they would be happy to help you find the perfect tool to suit your needs.

Want to be the first to know? Subscribe to our Newsletter!

Enter your email below and we will send you our latest content directly to your inbox. Be the first to read about topical discussions, and new product releases.

Leave a Reply

three × 5 =

More-Articles-Icon-Two-Documents-Blog-News-GEO-PSI

More Articles

Solutions-Reservoir-Surveillance-Applications-Free-Analysis-GEO-PSI
Archive
Jeff Scott

Permanent Downhole Gauges & The Importance Of Accountability

ac·count·a·bil·i·ty [uh-koun-tuh–bil-i-tee] I’m often asked, what does GEO PSI do? Technically we manufacture, install, and service continuous downhole pressure monitoring systems. While that may be interesting, there are at least 20 other companies in the world that can claim the same. I believe what makes us unique is that we are actually selling accountability to our customers.

Read More »
Solutions-High-Temperature-Applications-SAGD-GEO-PSI
Archive
Jeff Scott

Artificial Lift Innovation

A New Technology in Real Time Downhole Vibration, Pressure, and Temperature Measurement for Artificial Lift Systems Our Breakthrough In Downhole Telemetry Our R&D engineering group at GEO PSI has developed a new robust downhole telemetry for our permanent downhole tools that greatly improves the speed, quantity, and quality of downhole data transmission. Similar to most other

Read More »
Home-About-Us-Products-Tubing-Encapsulated-Downhole-Cable-Encapsulated-Bare-Quadline-Single-Conductor-Graphic-GEO-PSI
Archive
Jeff Scott

Cable Encapsulation – Circle or Square?

Which is the Ultimate Shape of a Cable? Circle or Square Which is the ultimate shape of a cable? The shape of a downhole cable has serious implications for the success or failure of a downhole system. While both have their own advantages and disadvantages there is only one ultimate cable shape. Compressional Load If

Read More »

Category

Vertical Integration

Category

Cable Protectors

Category

Top Posts

Category

Artificial Lift

Category

TEC

Category

Downhole Gauges

Looking for a complete fit for purpose solution for your well?

Fill out this short questionnaire and one of our experienced team members will show you a solution designed to match the specific requirements of your application.

Contact Information

Provide us with the necessary contact, and location information.


 

 

Downhole Conditions

Tell us about the downhole environment present in your well.


 

Please describe the type of environment the sensors will be in.

 

 

Packer/Obstruction #1

Packer/Obstruction #2

Packer/Obstruction #3

 

Completion Data

Please provide us with as much information on your specific completion as possible.


Surface Casing

 

Production Casing

2nd Production Casing

Tubing

2nd Tubing

Liner

 

 

Open Hole

 

 

What are the major application(s) for the downhole sensor(s)?

What are your preferred wellhead exit options?

What are the surface electronics required?

 

 

 

 

 

  • Your email is safe with us.

Africa Sales Contact

  • Your email is safe with us.

Europe – MENA Sales Contact

  • Your email is safe with us.

South-Central America Sales Contact

  • Your email is safe with us.

USA Sales Contact

  • Your email is safe with us.

Canada Sales Contact

  • Your email is safe with us.

Asia Pacific Sales Contact

  • Your email is safe with us.