GEO4-20 105

A cost-effective digital sensor with analog output designed to measure real-time pressure or fluid level.

GEO4-20-105-T-Downhole-Gauge-(Web)-GEO-PSI

GEO4-20 105 – Permanent Downhole Gauge

The GEO PSI GEO4-20 105 IECEx certified 4-20mA pressure gauge is the first cost-effective solution designed for measuring real-time pump intake pressure for artificial lift systems in oil & gas wells. This gauge is able to withstand vibrational forces exerted by high horsepower progressive cavity, rod, and ESP pumps.

Easy Connect Cablehead

Leak Proof Design

Intrinsically Safe

IECEx Certified

GEO4-20-105-T-Downhole-Gauge-(Web)-GEO-PSI

GEO4-20 105 – Permanent Downhole Gauge

The GEO PSI GEO4-20 105 IECEx certified 4-20mA pressure gauge is the first cost-effective solution designed for measuring real-time pump intake pressure for artificial lift systems in oil & gas wells. This gauge is able to withstand vibrational forces exerted by high horsepower progressive cavity, rod, and ESP pumps.

Easy Connect Cablehead

Leak Proof Design

Intrinsically Safe

IECEx Certified

Technical Specifications

Real-Time Data Applications

Measurement

Products-Downhole-Gauges-Bubble-Tube-System-Measurement-Pressure-Icon-Orange-GEO-PSI

Pressure (3,000 psi)

The GEO4-20 105 is designed to accurately measure pressure within available ranges between 50 - 3,000 psi.

Measurement

Pressure

Sensor Type

Piezoresistive

Output

4-20 mA

Input Voltage Range

8-30 VDC

Available Pressure Ranges

50  100  200  300  500  1,000  1,500  2,000  3,000 psiA

Proof Pressure

6,000 psiA

Pressure Accuracy

± 0.1% Full Scale (1)

Temperature Range

-40°C to 105°C (-40°F to 221°F)

Vibration Resiliency

10g at 10-2000Hz

Construction Material

Stainless Steel 316L

Overall Length

7.75″ / 19.69cm

Outside Diameter

0.95″ / 24.13mm

Process Connection

1/4″ NPT Male

Meets Or Exceeds The Following Standards

IECEx Ex ia IIB T3 Ga (2)(3) intrinsically safe.
Tamb = -20°C to 105°C (-4°F to 221°F)

Applicable Standards

IEC 60079-0: 2007-10
IEC 60079-11: 2006

Patented Easy-Connect Cablehead

Yes

Leak Proof Design

Yes

Pressure Testable Design

Yes

ISO Certified Manufacturing

Yes

(1) Average error is calculated from a sample batch of 100 units to the best straight line fit. All errors are expressed as a positive value to calculate the average, maximum allowable single error is ± 0.5% absolute full-scale. Typical average error ± 0.16% full scale (5 point verification at 20°C).
(2) GEO PSI certificate number: IECEx QPS 15.0018x is available at www.IECEX.com.
(3) When installed according to approved instruction manual.

Looking for the necessary components to build a complete fit for purpose system for your well?

Fill out this short questionnaire and one of our experienced team members will show you a solution designed to match the specific requirements of your well.

Visit this page on desktop to complete a brief questionnaire, or visit our contact page to get in touch with one of our experienced team members.

Contact Information

Provide us with the necessary contact, and location information.


 

 

Downhole Conditions

Tell us about the downhole environment present in your well.


 

Please describe the type of environment the sensors will be in.

 

 

Packer/Obstruction #1

Packer/Obstruction #2

Packer/Obstruction #3

 

Completion Data

Please provide us with as much information on your specific completion as possible.


Surface Casing

 

Production Casing

2nd Production Casing

Tubing

2nd Tubing

Liner

 

 

Open Hole

 

 

What are the major application(s) for the downhole sensor(s)?

What are your preferred wellhead exit options?

What are the surface electronics required?

 

 

 

 

 

Want to know more?

One of our team members would be happy to help.