PT105 SRO

GEO PSI’s most cost effective downhole gauge designed to measure both pressure & temperature, without sacrificing reliability.

Products-Downhole-Gauges-Analog-Gauges-P105-SRO-PT105-SRO-GEO-PSI

PT105 SRO – Permanent Downhole Gauge

The GEO PSI 4-20mA pressure & temperature gauge is the most cost-effective solution designed for measuring real-time pump intake pressure & temperature for artificial lift systems in oil & gas wells. This gauge is able to withstand vibrational forces exerted by high horsepower progressive cavity, rod, and ESP pumps.

Easy Connect Cablehead

Leak Proof Design

316L Stainless Steel

Products-Downhole-Gauges-Analog-Gauges-P105-SRO-PT105-SRO-GEO-PSI

PT105 SRO – Permanent Downhole Gauge

The GEO PSI 4-20mA pressure & temperature gauge is the most cost-effective solution designed for measuring real-time pump intake pressure & temperature for artificial lift systems in oil & gas wells. This gauge is able to withstand vibrational forces exerted by high horsepower progressive cavity, rod, and ESP pumps.

Easy Connect Cablehead

Leak Proof Design

316L Stainless Steel

Real-Time Data Applications

  • Pump Intake Pressure Measurement for Rod Pump, PCP, and ESP
  • Fluid Level Measurement
  • Bottomhole Pressure
  • Artificial Lift Optimization
  • Hydrology
  • Observation Wells
  • Suspended Depolyments

Measurement

Products-Downhole-Gauges-Bubble-Tube-System-Measurement-Pressure-Icon-Orange-GEO-PSI

Pressure (3,000 psi)

The PT105 SRO is designed to accurately measure pressure within available ranges between 500 – 3,000 psi.

Products-Downhole-Gauges-Measurement-Temperature-Icon-Orange-GEO-PSI

Temperature (105°C)

The PT105 SRO is designed to accurately measure temperature between -40°C to 105°C.

Output

4-20 mA Current Source Pressure & Temperature

Input Voltage Range

12-24 Volts DC @ 50mA

Available Pressure Ranges

500  1,000  2,000  3,000 psiA

Temperature Range

-40°C to 105°C (-40°F to 221°F)

Accuracy

± 0.1% full scale error best fit straight line. typical average error (1) ± 0.16% full scale (5 point verification at 20°C)

Temperature Accuracy

± 2°C

Long Term Vibration Resiliency

8g at 100 Hz measured peak-to-peak (2)

Compatible TEC cables

0.160″ / 4mm single conductor

Construction Material

Stainless Steel 316L

Outside Diameter

0.95″ / 24.13mm

Process Connection

1/4″ NPT Male

Length

7.75″ / 196.85mm measured from process connection to top of pressure testable cablehead

Patented Easy-Connect Cablehead

Yes

Leak Proof Design

Yes

Pressure Testable Design

Yes

(1) Average error is calculated from a sample batch of 100 units. All errors are expressed as a positive value to calculate the average, maximum allowable single error is ± 0.5% absolute full-scale.
(2) 14-day bench test.

Pressure Rating

Product Number

500 psiA

100196

1,000 psiA

100198

2,000 psiA

100197

3,000 psiA

100195

Looking for the necessary components to build a complete fit for purpose system for your well?

Fill out this short questionnaire and one of our experienced team members will show you a solution designed to match the specific requirements of your well.

Visit this page on desktop to complete a brief questionnaire, or visit our contact page to get in touch with one of our experienced team members.

Contact Information

Provide us with the necessary contact, and location information.


 

 

Downhole Conditions

Tell us about the downhole environment present in your well.


 

Please describe the type of environment the sensors will be in.

 

 

Packer/Obstruction #1

Packer/Obstruction #2

Packer/Obstruction #3

 

Completion Data

Please provide us with as much information on your specific completion as possible.


Surface Casing

 

Production Casing

2nd Production Casing

Tubing

2nd Tubing

Liner

 

 

Open Hole

 

 

What are the major application(s) for the downhole sensor(s)?

What are your preferred wellhead exit options?

What are the surface electronics required?

 

 

 

 

 

  • Your email is safe with us.

Output

4-20 mA Current Source Pressure & Temperature

Input Voltage Range

12-24 Volts DC @ 50mA

Available Pressure Ranges

500  1,000  2,000  3,000 psiA

Temperature Range

-40°C to 105°C (-40°F to 221°F)

Accuracy

± 0.1% full scale error best fit straight line. typical average error (1) ± 0.16% full scale (5 point verification at 20°C)

Temperature Accuracy

± 2°C

Long Term Vibration Resiliency

8g at 100 Hz measured peak-to-peak (2)

Compatible TEC cables

0.160″ / 4mm single conductor

Construction Material

Stainless Steel 316L

Outside Diameter

0.95″ / 24.13mm

Process Connection

1/4″ NPT Male

Length

7.75″ / 196.85mm measured from process connection to top of pressure testable cablehead

Patented Easy-Connect Cablehead

Yes

Leak Proof Design

Yes

Pressure Testable Design

Yes

(1) Average error is calculated from a sample batch of 100 units. All errors are expressed as a positive value to calculate the average, maximum allowable single error is ± 0.5% absolute full-scale.
(2) 14-day bench test.

Pressure Rating

Product Number

500 psiA

100196

1,000 psiA

100198

2,000 psiA

100197

3,000 psiA

100195

Looking for the necessary components to build a complete fit for purpose system for your well?

Fill out this short questionnaire and one of our experienced team members will show you a solution designed to match the specific requirements of your well.

Visit this page on desktop to complete a brief questionnaire, or visit our contact page to get in touch with one of our experienced team members.

Contact Information

Provide us with the necessary contact, and location information.


 

 

Downhole Conditions

Tell us about the downhole environment present in your well.


 

Please describe the type of environment the sensors will be in.

 

 

Packer/Obstruction #1

Packer/Obstruction #2

Packer/Obstruction #3

 

Completion Data

Please provide us with as much information on your specific completion as possible.


Surface Casing

 

Production Casing

2nd Production Casing

Tubing

2nd Tubing

Liner

 

 

Open Hole

 

 

What are the major application(s) for the downhole sensor(s)?

What are your preferred wellhead exit options?

What are the surface electronics required?

 

 

 

 

 

  • Your email is safe with us.

Want to know more?

One of our team members would be happy to help.