Production Optimization Horror Story: A Cautionary Tale
October 30, 2023 No Comments
A fair warning for all who dare to read Beware of this tale that lies
E6 Interface Card
A premium downhole telemetry decoder with a user friendly interface, and non-proprietary compatibility.
E6 ESP Gauge Telemetry Decoder
The E6 Interface Card is a downhole telemetry decoder that takes the raw signal from the downhole gauge, and converts it into usable data. When used with our ESP gauges and corresponding surface choke, the E6 Interface Card connects the downhole tool to the surface data acquisition equipment. The non-proprietary design allows the output data to be tied in to almost any traditional SCADA or other surface data acquisition setup.
Designed For Use With ESP Gauges
Direct 4-20mA / Modbus Output
Universally Compatible
Technical Specifications
Mounting Options
Our E6 Interface Card is designed to integrate into a number of surface setups. Users can mount this interface card using our DIN Rail bracket or the Mounting Clip depending on the application.
DIN Rail Bracket
Mounting Clip
Works With
Our E6 Interface Card is designed to work with a number of gauges. Compatible with all of our GEOESP gauges the E6 is designed to work with the GEOESP 150 Dual and the GEOSP 150 Dual EV.
Real-Time Data Applications
- ESP Controller
- Switchboard or VSD Compatible
- Enables Cellphone / Satellite Data Transmission
- Connects to any SCADA
Specifications
Compatible Gauge Types
GEOESP
Height
1” / 25.40mm
Width
4.99” / 126.75mm
Depth
4.01” / 101.85mm
Input Voltage
12-24 VDC
Line Voltage
120 VDC
Data Output
4-20mA
485 Modbus Protocol
1/2 Duplex RS45 Modbus
Modbus TCP Protocol
Temperature Rating
-40°C to 85°C
Certification
Ex ec mc IIC T6 Gc
QPS/ExTR20.0013
ISO Certified Manufacturing
Yes
